Follow steps to setup a new event and notification
1-Select alert type - select event / alert type from list below. (Recommended double click on template name)
2-Select units or groups - select units from scroll list one by one or click on group name to select all group. To select all tick in (Select all) box.
3-Alert - activates or disables event, type name of event or alert. Depending on event type: “Zones”, “Routes”, “Time period” and “Speed limit” available for selection or editing: Active - enable or disable event Name - type mane for event/alert Zones - drop down list available for various types of events to assign created zones Routes - drop down list available for various types of events to assign created routes Time period - type time to exclude from events. Event will be generated only above typed time limit Speed limit - type speed limit for various reports to set up allowed limits or leave “Road speed” selection for “Road limits over speed” event using “Overspeed” event type.
4-Time - allow to select preferred week days, time and duration interval between events. “Select day/time” box collapsed by default. Tick in to select daily times.
5-Notifications - various notification possibilities: System message - shows triggered event on monitoring window Auto hide - automatically close window of event after short time Push notification - push triggered event for notification Sound alert - enable sound for notification. Various sounds available to select E-mail - tick in and type e-mail for e-mail notification. Multiple e-mails should be separated with coma only. No spaces between e-mail addresses: email1@domain.com,email2@domain.com Text - available using Android smartphone with downloaded SMS Gateway App. App will work as modem. See Settings: SMS E-mail template and SMS template - selection for templates pre-configured in Settings: Templates
6-Alerts colours - tick in box and select “Unit arrow colour” preferred colour, when event triggered arrow will change colour. Selected “Object list colour” shows in unit’s list background
7-Save - save created new or edited event/alert more…
Saved
Events depends on fitted devices types.
SOS - notification of SOS alarm button is pressed on the object.
BRACELET ON - event is triggered if handcuffs are fastened.
BRACELET OFF- event is triggered if handcuffs are opened.
DISMOUNT - event is triggered if device is disassembled.
DOOR - event is triggered if device detects open door.
MAN DOWN - event is triggered if object lies on the ground (mostly used to monitor people body position).
SHOCK - event is triggered if GPS device shakes.
TOW - event will be sent if GPS device detects object movement with turned off ignition.
POWER CUT - event is triggered if GPS device power leads were disconnected.
GPS ANTENNA CUT - event is triggered if device GPS antenna is cut, not connected or broken.
SIGNAL JAMMING - event is triggered if GPS device detects signal jamming.
LOW DC - event is triggered if GPS device DC (direct current) is too low.
LOW BATTERY - event is triggered if battery voltage is too low.
CONNECTION YES - event is triggered if GPRS connection with GPS device was established.
CONNECTION NO - event is triggered if GPRS connection with GPS device was lost.
GPS: STRONG - event is triggered if connection with GPS device was established.
GPS: WEAK - event is triggered if connection with GPS device was lost.
PARKED - event is triggered if GPS device is standing longer than set period of time.
DRIVING - event is triggered if GPS device is moving longer than set period of time.
ENGINE IDLE - event is triggered if GPS device engine is idling longer than set period of time.
UNDERSPEED - object have slowed down below the specified speed
HARSH ACCELERATION - event is triggered if GPS device detects sudden unit acceleration.
HARSH BRAKING - event is triggered if GPS device detects sudden object braking.
HARSH CORNERING - event is triggered if GPS device detects sudden object cornering.
DRIVER CHANGE - event is triggered if supported device wired.
TRAILER CHANGE - event is triggered if supported device wired
PARAMETER- event is triggered if parameter received from device meets set condition.
SENSOR - event is triggered if sensor meets set conditions.
SERVICE - allows to set a reminder about vehicle maintenance work (example: change engine oil).
DTC (Diagnostic Trouble Codes) - event is triggered if device sends DTC error codes to server.
ROUTE IN - object crossed predefined route.
ROUTE OUT - object distanced from predefined route.
GEOZONE IN - object entered zone.
GEOZONE OUT - object left zone.
Events are used to trigger actions by important or disruptive activities. Customers can get an instant e-mail notifications triggered by different event types
Create new
1. Select event type
2. Select units or groups
3. Name event, assign zones, limits
Expand time selection view
7. Save event
4. Duration, weekdays, time selection
5. Notification possibilities
6. Colours for event types
Saved events table -shows all saved events, notifications and selected options for alerts.
- option enabled
- option disabled
Time period (min) - event will be triggered if chosen event type lasts for set period of time.
Speed limit (kph) - sets speed limit, works with overspeed and underspeed events.
Parameters and sensors - trigger event regarding sensor condition.
Trigger event depending on routes
Off - disable dependency.
In selected routes - event will be triggered if object goes into selected route.
Out of selected routes - event will be triggered if object goes out of selected route.
Select routes - select route from list (learn how to create routes). For multiple selection keep "Ctrl" button pressed.
Trigger event depending on zones
Off - disable dependency.
In selected zones - event will be associated only to selected zones.
Out of selected zones - event will be associated to all zones except selected ones.
Selected zones - select zone from list (learn how to create zone). For multiple selection keep "Ctrl" button preset events.
